LATANICK EQUIPMENT

LATANIK

Telescoping Valves, Stainless Steel Mud Valves, Rotary Sludge Draw-off Valves.

Watt Telescoping

  Valves

Rack & Pinion

The telescoping valve assembly/assemblies shall be manufactured by Latanick Equipment, Inc. Huron, Ohio.  The valve shall be sized to fit the riser pipe and penetrate a minimum of 4”.  The floor stand shall be 3” sch10 stainless steel pipe.  The handwheel shall be 14” diameter anodized aluminum and work in conjunction with a stainless steel shaft, 1” square steel rack, 2” steel pinion gear and (2) sealed anti-friction bearings.  The rack and pinion gear shall allow for 5” of travel per revolution of the handwheel.  The slip tube shall be stainless steel and have a minimum of 1/8” wall thickness.   The companion flange shall be a cast iron with a neoprene gasket.  The telescoping valve shall be guaranteed against defects in material and/or workmanship for a period of (1) year.

 

Watt Telescoping Valves
Click Here to Download specification

Click Here to Download submittal form

Click Here to Download Drawing

Click Here to Download Specifications

Click Here to Download Submittal Form

Click Here to Download Drawing

Rising Stem Screw

The telescoping valve assembly/assemblies shall be manufactured by Latanick Equipment, Inc. Huron, Ohio.  The valve shall be sized to fit the riser pipe and penetrate a minimum of 4”.  The floor stand shall be 3” sch10 stainless steel pipe.  The handwheel shall be 14” diameter anodized aluminum and work in conjunction with a stainless steel 1 ¼”-4 double start acme screw, bronze nut and stainless steel ball thrust bearing.  The screw and nut shall allow for ½” of travel per revolution of the handwheel.  The slip pipe shall be stainless steel and have a minimum of 1/8” wall thickness.  The companion flange shall be cast iron with a neoprene gasket.  The telescoping valve shall be guaranteed against defects in material and/or workmanship for a period of (1) year.

Telescoping Valves

Non-rising Stem Screw

The telescoping valve assembly/assemblies shall be manufactured by Latanick Equipment, Inc. Huron, Ohio.  The valve shall be sized to fit the riser pipe and penetrate a minimum of 4”.   The floor stand shall be 3”sch10 stainless steel pipe.  The handwheel shall be 14” diameter anodized aluminum and work in conjunction with a stainless steel 1 ¼”-4 double start acme lifting screw, stainless steel ball thrust bearing, delrin gears and delrin nut.  The screw and nut shall allow for ½” of travel per revolution of the handwheel.  The slip pipe shall be stainless steel and have a minimum of 1/8”wall thickness.  The companion flange shall be cast iron with a neoprene gasket.  The telescoping valve shall be guaranteed against defects in material and/or workmanship for a period of (1) year.

Click Here to Download Specifications

Click Here to Download Submittal Form

Click Here to Download Drawing